Electriflite

Skip to Main Content »

Search Site
Welcome to the World of Electriflite! For all your Electric flight needs

You're currently on:

 

ESC (Speed Controller)

Items 1 to 15 of 40 total Page:
  1. 1
  2. 2
  3. 3
  4. Next
Show per page
View as: List  Grid  Sort by Set Descending Direction
12V 4.5A UBEC - 2-5S Lipoly
£8.95
Out of stock
High efficiency switch mode UBEC

Specs:
Input: 14.8-21V (4-5S Lipoly)
Output: 12V/4.5A (Less than 50mV peak to peak voltage @ 2A)
Dimension: 55mm x 20mm x 11mm(LxWxH)
Weight: 11.7g (wires included) More...

| Add to Compare

2.5-25V Input, 3-25V Output Step-up Voltage Regulator
£7.95
2.5-25V Input, 3-25V Output Step-up Voltage Regulator.

* Please note: This device is for experienced electronics DIYers and requires electronic knowledge and soldering skills. You are responsible for ensuring that it is correctly wired and soldered. More...

| Add to Compare

3V-35V Input, 1.2-30V Output Step-down & Step-up Voltage Regulator
£5.75
This is the step-down and step-up integrated voltage regulator, specially designed for FPV related application. Typical application: Powering video TX or camera where using 12V inputs with 2-6S Lipo.

Input voltage:3-35V
Output voltage:mode 1: 1.25-30V adjustable; mode 2: fixed output (can be set to 1.25 to 30V)
Output current:constant 1A (when output at 12V); 1.5-2A when output is set to 5V.
Input current: 2A (MAX)
Output power: 12W under natural cooling condition and input voltage higher than 10V, 20W with heat sink.
Idle current: 10mA ( under 10-14V input and 12V output)
Working temperature: -40℃ to +85℃ (output power within 10W )
Wrong polarity protection: No, wrong polarity will burn the PCB directly.
Dynamic respond speed:5% 200uS
Short circuit protection:Yes (10 seconds)
Size: 5x2.3x1.1 cm (excluding potentiometer)

* Please note: This device is for experienced electronics DIYers and requires electronic knowledge and soldering skills. You are responsible for ensuring that it is correctly wired and soldered. More...

| Add to Compare

4.5-28V Input, 0.8-20V Output Mini Step-down Voltage Regulator
£4.98
Out of stock
4.5-28V Input, 0.8-20V Output Mini Step-down Voltage Regulator. 2A constant and 3A Max

Utilizes high efficiency conversion chip and Panasonic potentiometer

* Please note: This device is for experienced electronics DIYers and requires electronic knowledge and soldering skills. You are responsible for ensuring that it is correctly wired and soldered. More...

| Add to Compare

4.5-35V Input, 1.25-30V Output Step-down Voltage Regulator
£4.95
4.5-35V Input, 1.25-30V Output Step-down Voltage Regulator. 2A constant and up 3A with heatsink (not included)

* Please note: This device is for experienced electronics DIYers and requires electronic knowledge and soldering skills. You are responsible for ensuring that it is correctly wired and soldered. More...

| Add to Compare

5V 5A UBEC 2-5S Lipoly (6-23v)
£5.85
Out of stock
Will supply a steady 5V at 5A to your receiver and servos with a 2S to 5S Lipo battery pack More...

| Add to Compare

5V/6V 5A (7.5A burst) High Voltage 3-10S Switch Mode UBEC
£18.95
This UBEC is an advanced switching DC-DC regulator which will supply a constant 5A or more with short bursts of up to 7.5amps. The UBEC plugs into a 3 - 10 Cell Lipoly pack and supplies a constant 5 or 6v to your receiver.
The system includes an anti-short circuit and overheat function with a thin metal shield cover, reducing noise
Also included is an Output filter to reduce noise, an on/off switch and a step down regulator adapter.
Chip efficiency is 92%.
More...

| Add to Compare

6V 3A UBEC 2-5S Lipoly (6-23v)
£4.85
Will supply a steady 6V at 3A to your receiver and servos with a 2S to 5S Lipo battery pack More...

| Add to Compare

Fly Pro 40A brushless ESC with 5A BEC
£19.95
Out of stock
Fly Pro series 40A speed controller with 5A BEC.

Popular choice for Electric gliders More...

| Add to Compare

FLY Series 5.5V 6A Switch Mode UBEC (2-8S Input)
£5.94
Will supply a steady 6A, at 5.5V, to your receiver and servos with a 2S to 8S Lipo battery pack

1. Output Voltage: 5.5V
2. Continuous output current: 6 Amps
3. Burst output current: 8 Amps
4. Input: 6V-33.6V (2-8 cells lithium battery pack)
5. Quiescent current: 10mA
6. Size: 25mm*20mm*7mm (length*width*height)
7. Weight: 16g More...

| Add to Compare

HENGE 5V/6V 4A 2-6S Input Switch Mode UBEC
£7.98
Out of stock
Will supply a steady 4A at 5V 0r 6V (selectable) to your receiver and servos with a 2S to 6S Lipo battery pack More...

| Add to Compare

HENGE 5V/6V 6A 2-6S Input Switch Mode UBEC
£9.35
Out of stock
Will supply a steady 6A at 5V or 6V (selectable) to your receiver and servos with a 2S to 6S Lipo battery pack More...

| Add to Compare

HENGE 5V/6V 6A HV UBEC - 4-10S (14V-42.5V)
£9.95
Out of stock
Will supply a steady 6A at 5V or 6V (selectable) to your receiver and servos with a 4S to 10S Lipo battery pack More...

| Add to Compare

HiModel PRO 18 amp ESC Speed Controller

Regular Price: £11.95

Special Price: £9.95

The HiModel Professional series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response.
More...

| Add to Compare

HiModel PRO 40amp Speed Controller

Regular Price: £23.85

Special Price: £19.95

Out of stock
The HiModel Professional series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response.

Now shipping the latest 4.1 version with improved slow start for helicopters, faster throttle response with up to 400Hz PWM input rates.. More...

| Add to Compare

Items 1 to 15 of 40 total Page:
  1. 1
  2. 2
  3. 3
  4. Next
Show per page
View as: List  Grid  Sort by Set Descending Direction
 
Site by KYDONI